• Contains quaternary ammonium compounds along with cleaning agents to enhance antimicrobial effectiveness. • Contains surfactants and emulsifiers to improve cleaning performance on various surfaces. • Contains chelating agents to maintain effectiveness when used with water of different hardness levels and to prevent interference of heavy metals with the active ingredients in the product.

• For optimal performance, it is recommended to first clean the desired surface with clean water to remove visible contaminants such as blood, body fluids, and other residues. Then, measure the appropriate amount of concentrated Microzid GP-H solution using a graduated measuring cup, add water to reach the required volume, and mix thoroughly until the concentrated solution is completely dissolved and uniform (0.5% or 1% solution). After completing the above steps, disinfect the desired surfaces using a previously cleaned floor mop or cleaning cloth by applying the solution in a spiral motion. The minimum contact time with the disinfectant solution is 5 minutes. It is recommended that diluted Microzid GP-H solution be prepared and used daily. Note 1: It is recommended to use two separate containers: one for washing contaminated floor mops or cleaning cloths, and another for soaking them with the disinfectant solution. Note 2: Due to the incompatibility of cationic surfactants (Microzid GP-H) with anionic surfactants (common detergents, including soaps and cleaning powders) and chlorine-containing compounds such as bleach, simultaneous use of these substances should be avoided. Note 3: If Microzid GP-H solution is being used for the first time, it is recommended to first use an appropriate cleaner (other than household detergents) or repeat the disinfection process twice. • This product can be stored in sealed containers at room temperature (25–30°C), away from direct sunlight and flammable materials, for 2 years.

• When used correctly, no special precautions are required. • In case of accidental contact with skin, wash the affected area with plenty of water and seek medical advice if necessary. • Keep out of reach of children, food, and beverages.

• Manufacturing license from the Ministry of Health, Treatment and Medical Education of Iran • European standards EN1650 and EN1276 from the Quality Assurance Research Center of the Faculty of Pharmacy, Tehran University of Medical Sciences and Health Services • Center for Diagnosis and Control of Drugs and Biological Products • Certificate of non-corrosiveness from Razi Metallurgical Research Center.

Microzid GP-H disinfectant solution is supplied in polyethylene containers with volumes of 1, 5, and 20 liters.

Dilution Table:

Dilution Container Volume	Volume of Microzid GP-H Required	Water Volume	Time	Final Dilution
1 Liter	5 ml	995 ml	5 minutes	0.5%
	10 ml	990 ml	5 minutes	1%
5 Liters	25 ml	4975 ml	5 minutes	0.5%
	50 ml	4950 ml	5 minutes	1%