• A formulation containing quaternary ammonium compounds along with chelating agents to enhance effectiveness against various pathogenic microorganisms • Contains two types of surfactants to improve cleaning performance on surfaces contaminated with organic materials such as blood and mucus • Contains special polymers to prevent corrosive effects on instruments and equipment • Compatible with various surgical instruments

• To prevent the fixation of blood, tissue, or protein residues on instruments and equipment, the components of the device should first be separated, then washed and cleaned with water. For the disinfection of instruments and equipment, measure the appropriate amount of concentrated ID-MAX solution using a graduated measuring cup, pour it into a designated container for preparing the disinfectant solution, add water to reach the required volume, and mix thoroughly until the concentrated solution is completely dissolved and uniform (1% or 2% solution). After dilution, fully immerse the instruments in the prepared solution and, after a contact time of 15 minutes, remove them and rinse with clean water. Note 1: Keep the dilution container closed during the entire period of use. Note 2: This product must not be used simultaneously with anionic cleaners (such as household detergents) or products containing aldehyde and chlorine. • This product can be stored in sealed containers at room temperature (25–30°C), away from direct sunlight and flammable materials, for 2 years.

• When used correctly, no special precautions are required. • To prevent possible injuries while handling chemical substances, it is recommended to use gloves, appropriate protective clothing, and a mask. • In case of accidental contact with eyes or skin, wash the affected area with plenty of water and seek medical advice if necessary. • Keep out of reach of children, food, and beverages.

• Manufacturing license from the Ministry of Health, Treatment and Medical Education of Iran • European standard EN14348 from the Pasteur Institute of Iran • European standards EN14476, EN1650, and EN1276 from the Quality Assurance Research Center of the Faculty of Pharmacy, Tehran University of Medical Sciences and Health Services • Certificate of non-corrosiveness from Razi Metallurgical Research Center.

Microzid ID-MAX disinfectant solution is supplied in polyethylene containers with volumes of 1 liter and 5 liters.