logomicrozed
✕
  • microzed
  • Products
    • Dental Products
    • General Products
    • Hospital Products
    • Industrial Products
    • Livestock and Poultry Products
  • blog
    • Scientific Articles
    • Training Course
  • About Us
  • Contact Us
logomicrozed
  • microzed
  • Products
    • Dental Products
    • General Products
    • Hospital Products
    • Industrial Products
    • Livestock and Poultry Products
  • blog
    • Scientific Articles
    • Training Course
  • About Us
  • Contact Us
✕
  • microzed
  • Products
    • Dental Products
    • General Products
    • Hospital Products
    • Industrial Products
    • Livestock and Poultry Products
  • blog
    • Scientific Articles
    • Training Course
  • About Us
  • Contact Us
 

Microzyme


Microzyme Enzymatic Detergent Concentrate Solution

Microzyme concentrated enzymatic detergent solution is free of any aldehyde compounds and protein-fixing agents and is capable of cleaning and restoring the shine of instrument surfaces contaminated with blood and body secretions with a high contamination load, without causing any damage or corrosion.

The special formulation of this product, with its bactericidal properties, prevents the settling and re-deposition of materials on instrument surfaces and prepares them for the next stage of disinfection.

Ingredients:

• Cationic and Anionic Surfactants
• Protease Enzyme


 





 
  • Product Features
  • Usage and Storage Instructions
  • Safety Precautions
  • Certifications
  • Available Packaging
  • Dilution Table
• Simultaneous bactericidal and cleaning properties • Rapid and complete decontamination of surfaces contaminated with blood and body secretions • Non-corrosive effect on metals, plastics, and polymer coatings • Contains a polishing agent for metal instruments and equipment • Odorless and free from toxic vapors
• Add an appropriate amount (preferably 2%) of Microzyme solution into a suitable washing container, add water to the desired volume, and mix thoroughly until the concentrated solution is completely dissolved and evenly distributed (mix 20 ml of concentrated solution with 980 ml of water). Then, separate the parts of the instruments and completely immerse them in the prepared solution. After 5 to 10 minutes, remove the instruments and rinse them thoroughly with clean water (preferably distilled water) to prepare them for the next stage of disinfection. • Note 1: The use of this product does not replace the disinfection or sterilization process, and mixing it with other washing or disinfectant solutions should be avoided. • Note 2: For better performance, it is recommended that the diluted solution be replaced at least once daily. • Note 3: The solution should be prepared daily. Naturally, higher usage levels may require more frequent replacement of the solution. • This product can be stored in sealed containers, at room temperature (25–30°C), away from direct sunlight and flammable materials, for 2 years.
• When used correctly, there are no specific safety precautions required. • To prevent potential hazards while working with all chemical materials, it is recommended to use gloves, appropriate protective clothing, and a mask, and ensure proper ventilation in the working environment. • In case of accidental contact with the eyes or skin, wash the affected area with plenty of water and seek medical attention if necessary. • Do not use the empty product container for any other purposes. • Keep out of reach of children, food, and beverages.
• Manufacturing license from the Ministry of Health and Medical Education • Bactericidal activity certificate from the Razi Food and Drug Control Laboratory • Non-corrosiveness certificate from the Razi Metallurgical Research Center.
Microzed Microzyme disinfectant solution is supplied in polyethylene containers with a volume of 5 liters.
Dilution Container Volume Microzyme Volume Water Volume Contact Time Final Dilution
1 Liter 20 ml 980 ml 5–10 minutes 2%
5 Liter 100 ml 4900 ml 5–10 minutes 2%

Product Advantages

4 مرداد 1405

4Q-Vet


Read more
24 دی 1399

Microsept


Read more
24 دی 1399

CIP


Read more

Contact Us

Head Office Address: Tehran, Sardar Jangal Jonubi Street, Standard Square, Bahar Gharbi Street, End of Orchid Street, No. 3, Farasaz Building, First Floor

Branch Office Address (Branch 2): Tehran, Nelson Mandela Boulevard, Golfam Street, No. 38, Third Floor

Email: info@saziba.com

Contact Numbers

Phone: 021 - 2450 7000
Fax: 021 - 2450 7111

Head Office Postal Code: 1476934762

Branch Office 2 Postal Code: 1915673933

logomicrozed300-154